|Date Added:||28 September 2014|
|File Size:||48.67 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
How does HP install software and gather data?
A8AE-LE SOCKET OEM | Asus A8AE-LE Amd S RS PCI-e Sata
Wait at least 6 seconds and then return the cap to pins Removing the cap will cause system boot failure! The figure shows a network card install on the PCI Express x1 slot.
To print the manual completely, please, download it. Refer to the hard disk documentation for the jumper settings. Take note of the marked corner with gold triangle on the CPU. Clearing the BIOS password.
| Hp AmberineM A8AE-LE Board
Clearing the CMOS settings. The system may become unstable and may experience difficulty powering up if the power supply is inadequate. If you install two hard disks, you must configure the second drive as a slave device by setting its jumper accordingly. To erase the Password move the jumper cap from pins Default to pins Clear Password.
Insert the CPU with the correct orientation. Doing so will damage the motherboard! This port connects an external Video output device via a S-Video cable. Do not change any jumper setting while the computer is on. Turn OFF the computer and unplug the power cord.
Asia Pacific and Oceania. Remove the caps only when you are connecting the front panel audio cable.
HP and Compaq Desktop PCs – Motherboard Specifications, A8AE-LE (AmberineM)
Damage to the motherboard can result. This pin port connects a parallel printer, a scanner, or other devices.
Onboard audio or audio card.
Europe, Middle East, Africa. Plug the power cord and turn ON the computer.
This pin port connects a parallel printer, a scanner, or other devices. The figure shows a network card install on the PCI Express x1 slot. DIMMs are keyed to fit with only one direction. Orient the red markings on the floppy ribbon cable to PIN 1. Asia Pacific and Oceania. Hold down the F1 key during the boot up process and enter BIOS setup to change or clear the password.
Refer to the tables below.